| [Processing Methods] |
 |
Incision
Use hand move fretsaw of high-speed small motor fretsaw to
increase, Import compressed air to blow away the aluminum
panel powder during the incision, |
 |
Use rivet for mounting |
 |
Incision with gang saw or very sparse saw
Incise process undertaking that the surface of the panel is
well protected from damages,
Blow away the chaff with condensed air at the same time, |
 |
Use stainless steel self-tapping screw or threaded
screw, For large or heavy burden area, use of washer is
recommended. |
 |
Drill and enlarge eyelet
Use iron drilling head press crimple quickly, must use
lubricant as to avoid damaging the install surface, blow
away the chaff with condensed air at the sametime, |
 |
Welding, use heat sealing equipment, cut notch for weld |
 |
Clipping method, use aluminum or steel clippers to
clip tightly before proceeding with riveting |
 |
Plane the edge
Use electric planer or metal rasper to dispose the raw edge
after incision, Aware that there can not have powder, chaff
remains on the panel, |
 |
Glue mounting
Use glue that is suitable for metallic surface and in
accordance with need, Avoid gluing the plastic part, |
 |
Bend
Use something to underlay the aluminum plaslic panel first,
use electric or stepping scissor (take off knife) to bend,
Please pay attention on distinguishing the top and bottom,
and raw edge during bend, |
 |
To create graphics by spray-painting method at a dry
bulb temperature not exceeding 60c or according to
the paint supplier's technical equirements |
 |
Use different model pafferns machine to roll press to mold,
can not proceed heating progress, remember to use
proteclive under-layer during pressing to avoid damaging
the panel surface, |
 |
Silk screen printing
Use suitable silk screen ink for the printing of pattern |
 |
Cold bending method; mill a v-shape notch first; the
notch is 2-8mm wide, and bend. |
 |
Sticky back transfers, Cut out the pattern on sticky back
plastic and apply. |
 |
Cold roll press method; use press machine with adjustment,
roll press to mold with the smooth round roller bobbin,
notice do not damage the surface during the operation, |
 |
Manual Illustration
To create graphics as wanted, |
| |
| [The Construction and Installment Diagrams](click to zoom out) |
 |
 |
 |
| |
[Product Exhibition ]
