|
|
|
The Aluminum-plastic composite Panel |
| [Brief Introduction to the Product] |
Nowadays, the decoration materials tend to be"environment-protecting, energy-
saving". Aluminum cellular composite panel, which meets the need of the trend of today's
decoration material, is colored by super weather-resistance KYIAR-500 PVDF painting
and pre-roller-coat technology, produced by the advanced aviation technology and
automated-producing equipment. The product is of high intensity, good rigidity, light in
weight, super smooth, even-colored, sound- insulation, heat-insulation, damp-proof,
fire-proof, against wind, against vibration, weather-resistance, durable, easy and quick
for installing, rich colors. It is far better than the traditional aluminum-plastic composite
panel and aluminum panel. Aluminum cellular composite panel, which is the real
"environment-protecting, energy-saving"material, is the best choice for the decoration
material. The product can be used for the interior and exterior wall decoration of the
airport, the theatre, exhibition center, commercial center, locomotive and so on. |
| |
| [Specifications] |
Thickness of Aluminum: 0.70mm x 0.70mm/0.80mmx 0.80mm/1.00mmx 1.00mm
Thickness of Panel: 6/8/10/1 5/20/25/30mm
Coated by: PVDF
Any other color requested by clients is also available. |
| |
| [The Structure of the Cellular Pane] |
| The cellular panel is covered on both surfaces with aluminum plates with
aluminum honeycomb lamination in between, coated with primer, colorful topcoat
and varnish. |
|
|
The cellular panel composite material is always used in aviation. The product
is light in weight, good of rigidity, smooth, sound-insulation, heat-insulation. This
kind of aviation material, which can avoid transmogrification and vibration caused
by pressure, can be used for the exterior wall decoration of the skyscraper and
super skyscraper. The product, which is sound- insulation and against vibration,
can also be used in interior wall and ceiling. |
| |
| [
The Structure of the Stainless
Steel Cellular Panel] |
|
|
| |
| [Super-thin Stone Cellular Panel] |
|
|
| |
| [Stone-imitation Enamel Cellular Panel] |
|
|
| |
| [Function of the Product] |
Sound-insulation, heat-insulation, heat-preservation
As the air layer between both face panels is divided into multiple
sealed holes by the honeycomb structure, the diffusion of sound
wave and heat is greatly restricted, which allows the material to
have excellent heat preservation and sound-insulation functions.
Fireproof
After tested by National Fireproof Building Material Quality
Supervision & Inspection Center, the performance indexes of the
material meet the specification to hard-to-burn material, and its
flammability is certified as Grade GB-8624-B 1 according to GB-
8624-1997.
Superior-flat and excellent-rigid
Aluminum honeycomb panel is constituted by a number of
international dense honeycomb that act as numerous mini I beams
and can disperse the face panel pressure, which then enables each
part of the panel of the panel under even pressure and guarantees its
strength and also the flatness when it is in a large form.
Damp-proof
The material does not absorb moisture, and its surface applies
filming technology, which enables the color to be durable, and
makes it free from mildew and deformation ect. in damp
environment.
Weight-light. energy-saving
The material is only 1/70 of the same squared brick, and is only 1/3
of stainless steel plate in weight.
Environ mental-protection
The material does not give off any hazardous gasses which are
harmful to human body. It is easy to clean and recycle to reuse.
Rust-resistant
According to test, it show-s no change after being immerged into
2%HCL for 24 hours, and after being immerged in to saturation
Ca(OH)2 for 24 hours.
It is easy to install
There are attached aluminum alloyed keels available. It is easy to
install, which can save labors and time. It can also be moved away |
|
[Product Exhibition ]
